Question 1

How much does a wood burner installation cost in Lymington?

Accepted Answer

Every installation is bespoke, but a typical wood burner fitting in Lymington and the New Forest ranges from £1,500 to £3,500 depending on the stove, hearth, and flue requirements. We provide a free, no-obligation quote after a home survey so you know the full cost upfront.

Question 2

Do you offer free, no-obligation quotes?

Accepted Answer

Yes. We offer a completely free home survey and quotation with no pressure to proceed. We'll assess your space, discuss your options, and provide a clear, itemised quote so you can make an informed decision.

Question 3

What factors affect the cost of a wood burner installation?

Accepted Answer

The main cost factors include the stove model you choose, whether you need a flue liner or twin-wall chimney system, the type of hearth (slate, granite, or stone), any chimney opening or brickwork required, and whether you'd like a custom oak beam or mantel. We'll walk you through all the options during your free survey.

Question 4

Do you require a deposit to book an installation?

Accepted Answer

We typically require a small deposit to secure your installation date and order your stove. The balance is due on completion once you're fully satisfied with the work. Full details are included in your written quote.

Question 5

Do I need a HETAS certificate for my wood burner?

Accepted Answer

Yes. If you install a new wood burning stove, building regulations require a HETAS certificate. As HETAS-registered installers, we issue your certificate on completion, ensuring your installation is fully compliant and safe. This is also important for home insurance and future property sales.

Question 6

Are you HETAS-registered installers?

Accepted Answer

Yes, Ablaze Fireplaces is a HETAS-registered installer. This means we're fully qualified and assessed to install solid fuel appliances, and we can self-certify our work to comply with Building Regulations.

Question 7

Are you fully insured?

Accepted Answer

Absolutely. We carry full public liability insurance and all necessary certifications, giving you complete peace of mind throughout your installation.

Question 8

Will a wood burner affect my home insurance?

Accepted Answer

Most insurers require a HETAS certificate for wood burner installations. Because we're HETAS-registered, we provide this certificate on completion, which you can share with your insurer. We recommend checking with your insurer before installation.

Question 9

Can you install a wood burner in a home without a chimney?

Accepted Answer

Absolutely. We specialise in twin-wall chimney systems that allow a wood burner to be installed in any home, even without an existing chimney. The flue can be routed internally or externally to suit your property, and we'll advise on the best option during your survey.

Question 10

How long does a stove installation take?

Accepted Answer

Most wood burner installations in Lymington and Hampshire are completed in 1–2 days. More complex projects involving chimney opening or custom hearth stonework may take 2–3 days. We always leave your home clean and tidy.

Question 11

Do you supply the stove or do I need to buy my own?

Accepted Answer

We can do both. We supply and fit a range of high-quality wood burning and multi-fuel stoves from trusted manufacturers, or we're happy to fit a stove you've already purchased - provided it meets current safety and EcoDesign standards.

Question 12

What is a twin-wall flue system and when is it needed?

Accepted Answer

A twin-wall flue is a insulated chimney system used when there's no existing chimney. It consists of two stainless steel walls with insulation between them, allowing the flue to pass safely close to combustible materials. It can be routed inside or outside your home.

Question 13

Do you make custom hearths and oak beams?

Accepted Answer

Yes, bespoke hearths and mantels are our specialty. We craft custom slate, granite, and stone hearths and source reclaimed oak beams to suit your fireplace opening and room character. Each piece is made to measure.

Question 14

Will installation create a lot of mess in my home?

Accepted Answer

No. We take great pride in clean, respectful workmanship. We use full dust protection - sealing off rooms, covering floors and furniture, and using specialist dust extraction equipment. We clean up thoroughly before we leave.

Question 15

Can you open up an old fireplace that's been blocked?

Accepted Answer

Yes, opening up and restoring blocked or bricked-up fireplaces is one of our most common projects. We carefully expose the original opening, line the chimney if needed, and fit your new stove with a bespoke chamber and hearth.

Question 16

Do I need planning permission for a wood burner?

Accepted Answer

In most cases, no planning permission is needed for a wood burner installation. However, if you live in a listed building or conservation area (common in the New Forest), there may be restrictions on external flue systems. We'll advise on this during your survey.

Question 17

Can you install a stove in a new-build property?

Accepted Answer

Yes. New-build homes are ideal for twin-wall flue systems. We can install a wood burner in virtually any room, even without an existing chimney, making stoves a popular choice for modern Hampshire homes.

Question 18

How often should I have my chimney swept?

Accepted Answer

We recommend having your chimney or flue swept at least once a year, ideally before the heating season begins. Regular sweeping maintains efficiency, prevents chimney fires, and keeps your warranty valid. We can recommend trusted local sweeps.

Question 19

Do you offer a guarantee on your work?

Accepted Answer

Yes, all our installations come with a workmanship guarantee. Stove manufacturer warranties also apply, typically 5–10 years depending on the model. We'll provide all warranty documentation with your HETAS certificate.

Question 20

What type of wood should I burn in my stove?

Accepted Answer

Always burn seasoned hardwood (below 20% moisture content) such as oak, ash, or beech. Never burn treated, painted, or wet wood as it produces creosote, reduces efficiency, and can damage your flue. We provide full guidance on wood selection after installation.

Question 21

Do you offer servicing or maintenance after installation?

Accepted Answer

While we specialise in installation, we provide comprehensive aftercare guidance and can recommend trusted local chimney sweeps for annual maintenance. We're also always on hand for any questions about your stove after fitting.

Wood Burner InstallationQuestions Answered

Pricing & Quotes

HETAS Certification & Safety

Installation & Technical

Your Home & Property

Aftercare & Maintenance

We're Happy to Help